Permobil F5 Corpus Service Manual page 78

F5 Corpus
7. Remove the circlip and the bolt at the back of the parallel armrest
rod.
8. Remove the seven screws marked (B) securing the seat frame's rear
section.
9. Take note of the current seat depth setting with consideration to
subsequent assembling. The rails with which the seat depth is
adjusted are marked with the settings for each potential position.
The scale is marked with "millimeters" on one side and "inches" on
the other. Pull the rear section of the seat forward to uncover the
three screws holding the power motor of the seat tilt mechanism.
10. Remove the power motor of the seat tilt mechanism, it is assembled
with three screws.
78
Repairs - Chassis
Figure 214. The parallel armrest rod rear attachment.
Figure 215. The position of the rear section of the seat
frame (backrest position) is fixed by seven screws, here
marked with the letter B.
Figure 216. The power motor of the seat tilt mechanism
is assembled with three screws.