Trunk Support Height - Permobil F5 Corpus Service Manual

F5 Corpus
This adjustment applies only to earlier models of the parallel panel
holder.
The panel holder can be installed under either the right or left armrest,
the holes closest to the seat is supposed to be used for the panel holder.
Rotate the bar 180° to make it left- or right compatible. It can also be
adjusted for a high (A) or low (B) position.
When the preferred position is reached, tighten the two screws together
with the two washers. Tightening torque 4.2 lb.ft.
Install the panel holder, see 5.1.9 Panel holder , Page 175.
This adjustment only applies to the new parallel panel holder.
The panel holder bracket is adjustable height wise. The panel holder
bracket can also be flipped to alter the base position further.
When the preferred position is reached, tighten the two screws together
with the two washers. Tightening torque 4.2 lb.ft.
Install the panel holder, see 5.1.9 Panel holder , Page 175.
5.1.10

Trunk support height

For this task the following tools are necessary:
• 1 Allen key 5 mm.
The height of the trunk support can be adjusted to give the user optimal
comfort.
182
Adjustments - Seat
Figure 544. There are several settings depending on
preferred position.
Figure 545. Height adjustment.
Figure 546. Flipping the bracket.