Lights And Turn Signals - Permobil F5 Corpus Service Manual

F5 Corpus
4.2.14

Lights and turn signals

4.2.14.1 Main cable
Removing main cable
1. Switch off the power supply using the On/Off key on the control
panel and switch the automatic main fuse to Off. See
4.3.5 Main circuit breaker , Page 165.
2. Remove the chassis covers. See 4.2.1 Covers , Page 67.
3. Remove the drive package covers including the front fender. See
Removing drive motor cover , Page 73.
4. Disconnect the connectors J4, J5 och J7 from the ICS master
module.
5. Remove the cable from its cable brackets on the left and right hand
side of the chassis.
6. Remove the lights cabling from the cable tunnels on the left and
right hand side of the chassis.
Repairs - Chassis
Figure 452. ICS master module.
Figure 453. The cable is assembled with three cable
brackets on the left and right hand side of the chassis.
Figure 454. Lights cabling.
151