Permobil F5 Corpus Service Manual page 42

F5 Corpus
7. Remove the four screws attaching the armrest hinge to the backrest.
Also remove the four washers.
8. Remove the joint for the backrest slide function, which is held in
place by one screw.
9. Carefully move the armrests together with armrest hinge backwards.
Lay the armrest together with the armrest hinge behind the seat.
10. Loosen the two screws on the left and the right side of the backrest
profile.
11. Slide the backrest profile out from the hinge and slewing bracket by
pulling it straight up.
42
Figure 91. The armrests are held in place by four
screws
Figure 92. The joint for the backrest slide function is
held in place by one screw.
Figure 93. The armrests together with the armrest hinge
are only attached by the two tie bars to the seat.
Figure 94. The backrest profile is secured by two
screws on the left and right.
Repairs - Seat