Permobil F5 Corpus Service Manual page 89

F5 Corpus
8. Remove the ICS master module bracket. It is attached with two
screws.
9. Remove the motor, it is attached with three screws.
10. Remove the belt from the belt wheels.
Mounting AP elevator lift motor and belt
1. Assemble the belt on to the belt wheels.
2. Assemble the motor using the three screws and washers. Do not
tighten the screws fully, they have to be somewhat loose in order to
adjust the belt tension.
3. Adjust the belt tension by pulling the motor to the side and then
tightening the three screws.
Repairs - Chassis
Figure 252. ICS master module bracket.
Figure 253. The motor is attached with three screws.
Figure 254. The motor is attached with three screws.
89