F5 Corpus
5.1.7
Armrest angle
The armrests are both individually foldable. The armrest angle can easily
be adjusted for optimal comfort.
1. Loosen the two lock nuts on the adjustment bars.
2. Adjust the armrest angle by turning the adjustment bars.
3. Tighten the two lock nuts to secure the adjustment bars in position.
WARNING!
Risk of injury while adjusting armrests
Do not subject the armrests to load while adjusting.
5.1.8
Armrest height and angle
The following tools are necessary for this task:
• 1 Allen key, 8 mm.
The armrest height and angle is normally adjusted as described
previously. However, for special needs, the armrests is adjustable
individually for users who want a left and right arm rest at different
heights and/or angles. The angle of the armrest is secured using a screw.
1. Loosen the two nuts (D) securing the position of the adjustment bar.
2. Adjust the armrest by turning the adjustment bar (C).
3. Secure into position by tightening the lock nuts (D).
4. Secure the armrest angle by moving the screw from a fixed position
(A) to a flexible position (B).
5. Adjust the armrest to the required angle.
6. Secure by tightening the screw (B).
NOTICE
Armrest flexible position
This type of adjustment should only be made for special needs. It may have
negative effects on the movement of the armrest when raising or lowering the
backrest
WARNING!
Risk of injury while adjusting armrests
Do not subject the armrests to load while adjusting.
5.1.9
Panel holder
The control panel holder can be mounted on the left or right armrest.
Adjustments - Seat
Figure 519. Armrest angle adjustment bars.
Figure 520. Adjusting the armrest height and angle.
175