Permobil F5 Corpus Service Manual page 43

F5 Corpus
12. Loosen the screws on the left and right side of the backrest profile
and then remove its end cover by sliding it straight out.
13. Remove the adjustment bar brackets, which are each held in place
by two screws.
14. Screw the adjustment bar down far enough to be able to prize it up
out of the groove on the backrest profile.
Figure 95. The end cover of the backrest profile is
secured using one screw on the left side and one on the
right.
Figure 96. The adjustment bar brackets are each held in
place by two screws.
Figure 97. Screw the adjustment bar down far enough
to be able to prize it up out of the groove on the
backrest profile.
Repairs - Seat
43