F5 Corpus
13. Remove the screw and washer from the front bracket of the
actuator.
14. Remove the actuator.
4.1.5.2
Mounting backrest actuator
1. Apply grease (Lubetec Red Guard or equivalent) on the shaft.
2. Assemble the front end of the actuator with the screw and washer.
Tightening torque 7.2 lb.ft.
Figure 47. The front attachment of the actuator.
Figure 48. You have to angle out the actuator.
Figure 49. The shaft on the actuator bracket.
Figure 50. The front attachment of the actuator.
Repairs - Seat
29