Permobil F5 Corpus Service Manual page 177

F5 Corpus
Panel holder height adjustment
1. Remove the control panel, see .
2. Remove the two screws.
3. Position the front part of the panel holder to the preferred height.
4. Screw in the two screws securing the front part of the panel holder.
5. Install the control panel, see .
Panel holder base position
1. Remove the control panel, see .
2. Remove the two screws and the front part of the panel holder.
3. Unscrew the handle until the joint is separated.
Adjustments - Seat
Figure 525. The two screws securing the front part of
the panel holder.
Figure 526. There are several positions for the panel
height.
Figure 527. The two screws securing the front part of
the panel holder.
Figure 528. Exploded view of the panel holder's joint.
177