F5 Corpus
2. Remove the adjustment crank.
3. Adjust the armrests to the required position using the adjustment
crank in the adjustment screw on the rear of the backrest.
4. Secure the height of the armrest by tightening the four screws on
the rear of the backrest.
5.1.6
Armrest width
For this task the following tools are necessary:
• 1 Allen key 6 mm.
The distance between the armrests can be adjusted to give the user
optimal comfort. Adjustment of the left and right armrests uses three
fixed levels, each 1" apart.
1. Loosen the screw for armrest width adjustment approximately 3
turns.
Adjustments - Seat
Figure 512. The adjustment crank is located in the
backrest profile.
Figure 513. Use the supplied adjustment crank.
Figure 514. The armrest width is fixed using one screw.
173