Permobil F5 Corpus User Manual
  1. Manuals
  2. Brands
  3. Permobil Manuals
  4. Wheelchair
  5. F5 Corpus
  6. User manual

Permobil F5 Corpus User Manual

Hide thumbs Also See for F5 Corpus:
Table of Contents

Advertisement

Quick Links

Download this manual
F5 Corpus
|
User manual
American English for Australia

Advertisement

Table of Contents
loading

Related Manuals for Permobil F5 Corpus

Summary of Contents for Permobil F5 Corpus

  • Page 1 F5 Corpus User manual American English for Australia...
  • Page 2 Welcome to the Permobil family We hope that you enjoy your new power wheelchair. Permobil Australia Permobil's founder, Dr. Per Uddén, believed that every person 8 Viewbrook Close has the right to have his or her disability compensated as far as...

  • Page 3: Table Of Contents

    Introduction 4.10.1 Headrest 4.10.2 Headrest with link hardware Overview 4.10.3 Backrest tilt 4.10.4 Removing the backrest Wheelchair specification 4.10.5 Armrest Tool bag 4.10.6 Leg rest tilt General control panel 4.10.7 Footplates Omni2 4.10.8 Lumbar support Connected wheelchair 4.10.9 Trunk support Lights and reflectors 4.10.10 Knee support...

  • Page 4: Introduction

    It instructs you on how to properly and safely use and care for your wheelchair. This user manual and additional information concerning our products are available at www.permobil.com or by telephone. Your power wheelchair is a complex medical device prescribed to you by your healthcare provider and configured to meet your needs.

  • Page 5: Overview

    This chapter gives you an overview of your wheelchair. The parts on the overview image are described in more detail throughout the manual. The Permobil F5 Corpus is a front-wheel drive power wheelchair for outdoor and indoor driving. It is intended for people limited to a seated position.

  • Page 6: Wheelchair Specification

    Wheelchair specification F5 Corpus Product name: Wheelchair class: Height, width, and length Height: 1090–1170 mm (43"–46") Width: 650–790 mm (25.5"–31") Length: 1165 mm (46") Smallest transportation size Height: 875 mm (34.5") Width: 650–790 mm (25.5"–31") Length: 955 mm (38") Weight specification Wheelchair with batteries: 189 kg (417 lb.)

  • Page 7: Tool Bag

    Tool bag The wheelchair comes with a tool bag for maintenance and adjustments. It contains the following tools: Wrench general maintenance 11 mm 13 mm Allen keys general maintenance and seat adjustment 2–6 mm Socket wrench general maintenance 15 mm Overview - 7...

  • Page 8: General Control Panel

    General control panel Joystick Example of button functions A. On/off B. Horn C. Decrease maximum speed D. Increase maximum speed For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 8 - Overview...

  • Page 9: Omni2

    Omni2 Your wheelchair can be equipped with an Omni2. An Omni2 is a device that makes it possible to operate the wheelchair with something other than a standard joystick. Button configuration for Omni2. A. On/off E. LCD screen B. Profile F.

  • Page 10: Connected Wheelchair

    Connected wheelchair ConnectMe contains a radio transmitter. In certain areas, radio transmission is not allowed and ConnectMe must be set to flight mode For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 10 - Overview...

  • Page 11: Lights And Reflectors

    Front reflectors Rear reflectors If the wheelchair is equipped with lights, Permobil recommends that you use them whenever you drive near public rights of way. Do not drive in the dark unless your wheelchair is equipped with lights. When you drive in the dark, be extra cautious.

  • Page 12: Wheels

    Wheels The wheelchair drive wheels have pneumatic tires or flat-free (foam filled) tires. The caster wheels have pneumatic tires or solid polyurethane tires. Pneumatic tires Flat-free (foam filled) tires Inflating the pneumatic tires. See page 63. 12 - Overview...

  • Page 13: Tie-Down Points

    Tie-down points The wheelchair is equipped with four tie-down points used for transportation . Two in the front and two in the rear Vehicle transportation. See page 33. Overview - 13...

  • Page 14: Serial Number Label

    Serial number label The serial number label is located on the lower, left side of the wheelchair chassis. An additional serial number label is located on the seat lift. You may need to lift the seat for better visibility. The contents of the serial number label are described on page 22.

  • Page 15: Accessories

    2.10 Accessories Accessories for Permobil products are subject to continuous development. Contact your nearest Permobil dealer for more information on the accessories available for your product. Only use accessories that are authorized by Permobil. Overview - 15...

  • Page 16: Spare Parts

    2.11 Spare parts Spare parts must be ordered through your dealer. Only use spare parts that are authorized by Permobil. 16 - Overview...

  • Page 17: User Manual

    2.12 User manual Main text area Main illustration area Text correlates to the illustration to the right Tool list Instruction steps Warning sign Chapter and page number Overview - 17...

  • Page 18: Safety

    This chapter contains important information about how Indicates important information. to safely use your wheelchair. Permobil is not responsible for personal injuries or property Warning signs damage resulting from any person’s failure to follow the warnings and instructions in this manual or from failure to WARNING! Do not overload the exercise good judgment.
  • Page 19 IMPORTANT! Do not modify the IMPORTANT! Replace damaged charging wheelchair components Do not modify your wheelchair or any of its components. Your If either the charger plug or charger socket becomes wheelchair has been configured specifically for your needs as damaged, both must be replaced by qualified personnel.
  • Page 20 If the wheelchair or its accessories have suffered trans- portation damage, damage during driving, or damage from other causes, you must inform Permobil as soon as possible WARNING! Do not remove the support and immediately stop using your wheelchair. There is a risk...
  • Page 21 Events like these can lead to significant damage that is impossible to detect upon Used batteries must be disposed of responsibly in accordance inspection. Contact your service provider or Permobil. with local recycling regulations. Damage caused by these types of incidents exceeds the limits covered by the manufacturer’s warranty.

  • Page 22: Labels

    These labels are described in Warning greater detail in this subchapter. Do not remove labels from the wheelchair. If a label becomes difficult to read or falls off, order This label indicates that special attention is required. a replacement from Permobil. 22 - Safety...
  • Page 23 Read the instructions Freewheel mode This label means that you must refer to your user manual. The picture above the arrows indicates that the wheelchair is not in freewheel mode. The pictures below the arrows indicate that the wheelchair is in freewheel mode. Read more about freewheel mode on page 33.

  • Page 24: Wheelchair Usage

    To drive your wheelchair, you must first turn on the power. The power button or switch is most commonly located on the wheelchair’s control panel, which is usually attached to the armrest. Most Permobil wheelchairs also include a joystick on the control panel. Use this joystick to turn the wheelchair and to drive forward and rearward.
  • Page 25 For additional information on how to control your wheelchair, refer to any other documentation received with your wheelchair or contact your Permobil dealer. Turn off the power before you get in or out of the wheelchair or lift the armrest. Do not use the joystick, footplates, or armrests as support when you get in or out of the wheelchair.
  • Page 26 Permobil recommends that you do not use the wheelchair in extreme conditions, such as heavy rain, thick snow, or excessive heat or cold.
  • Page 27 Avoid sudden stops and starts. Use extreme caution in any of the following situations: • when you are near edges or on elevated surfaces • when you drive on soft or uneven surfaces, such as grass, gravel, sand, ice, or snow •...

  • Page 28: Support Wheels

    Your wheelchair can have seat functions. A seat function is a power adjustment. Due to the custom nature of Permobil products, your wheelchair is equipped with one of numerous different ways to adjust its seat functions. For additional information on how to control your wheelchair, refer to any other documentation received with your wheelchair or contact your Permobil dealer.
  • Page 29 The wheelchair’s center of gravity changes when you change the position of the seat and/or the backrest. When you lift or tilt the seat or backrest, you decrease the wheelchair’s stability. WARNING! Drive extra carefully when lifted or tilted 4.3.1 Seat lift The seat lift lifts and lowers the seat.
  • Page 30 4.3.2 Seat tilt The seat tilt tilts the entire seat, from headrest to leg rest. When the seat is tilted, the maximum speed of the wheelchair can be reduced automatically or the ability to drive the wheelchair can be restricted completely. The reduced maximum speed can be indicated with a turtle on the display of the control panel and by a yellow light on the switch box.
  • Page 31 4.3.4 Backrest tilt The backrest tilt tilts the backrest rearward and back up again. When the backrest is tilted, the maximum speed of the wheelchair can be reduced automatically or the ability to drive the wheelchair can be restricted completely. The reduced maximum speed can be indicated with a turtle on the display of the control panel and by a yellow light on the switch box.

  • Page 32: Charging The Batteries

    Charge the batteries in a well-ventilated, dry room. Never expose your batteries or any part of your wheelchair to an open flame. Only use a Permobil charger intended for use with your wheelchair. It is not possible to drive the wheelchair while it charges.

  • Page 33: Freewheel Mode

    Freewheel mode The wheelchair is fitted with two freewheel levers. When the freewheel levers are released, the wheelchair’s brakes are disengaged from the motor. When in freewheel mode, the wheelchair can be moved manually, but cannot be controlled electronically. When the wheelchair is in freewheel mode, it must not be possible to drive the wheelchair.
  • Page 34 4.6.1 Securing the wheelchair in a vehicle This chapter describes how you secure the wheelchair in a vehicle. You must either secure the wheelchair at its tie-down points or use a docking system that complies with ISO 10542–1:2012, which is an international standard that governs wheelchair tie-downs and occupant-restraint systems.
  • Page 35 4.6.2 Using the wheelchair as a seat in a vehicle Permobil recommends that you transfer to a vehicle seat and that you use the vehicle’s restraint systems. The unoccupied wheelchair should be stored in a cargo area or secured in the vehicle during travel. Follow the instructions below if you want to use the wheelchair as a seat in a vehicle.

  • Page 36: Air Transportation

    You must use both pelvic-belt restraints and shoulder-belt restraints. Make sure that the belt restraints are as tight as possible, without becoming uncomfortable, and that they are not twisted. They must be close to your body and not held away by parts of the wheelchair. Adjust your restraint system such that the release mechanisms cannot be pressed during a crash.
  • Page 37 4.7.1 Batteries The main circuit breaker must always be in the off position. In most cases, gel batteries do not have to be removed from the wheelchair. 4.7.2 Weight and dimensions Contact the relevant airline for applicable rules on weight and dimensions for your power wheelchair.

  • Page 38: Main Circuit Breaker

    Main circuit breaker Your wheelchair has a main circuit breaker with two functions. You can use it to turn off the main power, for example before you transport the wheelchair. It also trips if there are any issues with the circuits. The first time the main circuit breaker trips, you can reset it yourself.

  • Page 39: Manual Adjustments

    When you store it for a long time, fully charge the batteries before storage. Remember to switch off the main circuit breaker. Charge the batteries every month. You will need to switch on the main circuit breaker to charge the batteries, then switch off the main circuit breaker if the wheelchair is to remain in storage.
  • Page 40 This is how you adjust the height and depth of the headrest. 1. Loosen handle on the backrest. 2. Adjust the height or depth to the preferred position. 3. Tighten handle This is how you adjust the angle of the headrest. 1.

  • Page 41: Headrest With Link Hardware

    This is how you remove and install the headrest. 1. Loosen handle on the backrest. 2. Lift the headrest straight up. Install the headrest in the reverse order. You can remove and install the headrest without affecting current settings. 4.10.2 Headrest with link hardware This chapter shows you how to adjust the height, depth, and angle of the headrest.
  • Page 42 This is how you adjust the height and depth of the headrest. Allen key 5 mm 1. Loosen the screw at each link 2. Change the angle of the links as required. 3. Tighten the screws. This is how you adjust the angle of the headrest. Allen key 5 mm 1.

  • Page 43: Backrest Tilt

    This is how you remove and install the headrest. 1. Loosen handle at the rear of the backrest. 2. Lift the headrest straight up ( ). Install in the reverse order. You can remove and install the headrest without affecting current settings. 4.10.3 Backrest tilt You can adjust the backrest to several fixed positions.

  • Page 44: Removing The Backrest

    4.10.4 Removing the backrest You can remove the backrest to make transportation of the wheelchair easier. First, remove backrest cushion . It is attached with Velcro. Then carefully undo clip on the backrest and pull the upper part of the backrest straight up ( ).
  • Page 45 4.10.5.1 Swiveling armrest This chapter describes how you adjust a swiveling armrest. A swiveling armrest is an armrest that you can push in or out as preferred between certain settings. There are three swivel settings ( , , and ) and one locked setting ( ).
  • Page 46 4.10.5.2 Armrest height and armrest angles This chapter shows you how to adjust the height of the armrest and the angles of the armrest. There are two ways to adjust the armrest angle. This is how you adjust the height of the armrest. You can see the current height of the armrest on the backrest.
  • Page 47 This is one way to adjust the angle of the armrest. The lower lock nut has a left-hand thread. Wrench 14 mm 1. Loosen the two lock nuts on adjustment bar 2. Turn the adjustment bars to adjust the armrest angle to the preferred position.
  • Page 48 This is the other way to adjust the angle of the armrest. Allen key 5 mm 1. Move the screw from fixed position to flexible position 2. Adjust the armrest angle to the preferred position. 3. Tighten screw 48 - Wheelchair usage...

  • Page 49: Leg Rest Tilt

    4.10.6 Leg rest tilt The leg rest on your wheelchair can be adjusted to several positions from vertical to horizontal. 1. Pull out handle of the quick-acting lock so that the locking tube moves freely. 2. Adjust the leg rest angle to the preferred position. 3.
  • Page 50 This is how you adjust the height of the footplates. Adjusts both footplates to the same height Adjusts the footplates separately, if you prefer them at different heights 1. Undo the locking screws. 2. Adjust the footplates to the preferred height. 3.

  • Page 51: Lumbar Support

    4.10.8 Lumbar support This chapter shows you how to adjust the lumbar support. The lumbar support consists of three cushions with Velcro. If you want to adjust it, simply remove the backrest cushion and adjust the lumbar support as preferred. Wheelchair usage - 51...

  • Page 52: Trunk Support

    4.10.9 Trunk support This chapter shows you how to adjust the height of the trunk support. This is how you adjust the height of the trunk support. Allen key 5 mm 1. Remove the backrest cushion. 2. Loosen screw on the backrest that holds the trunk support in place. 3.

  • Page 53: Knee Support

    4.10.10 Knee support This chapter shows you how to remove and attach the knee support. All adjustments of the knee support must be made by an authorized service technician. You can remove the knee support from the leg rest to make it easier to get in and out of the wheelchair.

  • Page 54: Rotational Panel Holder

    4.10.11 Rotational panel holder You can adjust the distance between the armrest and the control panel, the resistance of the rotational panel holder, and the angle of the rotational panel holder. This is how you adjust the distance between the armrest and the control panel.
  • Page 55 You can angle the rotational control panel to either side. This is how you adjust the angle. Allen key 4 mm 1. Remove screw on the side you want to angle. 2. Loosen the other screw 3. Adjust the angle of panel to the preferred position.

  • Page 56: Parallel Panel Holder

    4.10.12 Parallel panel holder You can adjust the distance between the armrest and the control panel. It is also possible to adjust the angle of the control panel. This is how you adjust the distance between the armrest and the control panel.
  • Page 57 This is how you adjust the angle of the control panel. Allen key 4 mm Slide the panel to the preferred position. You can loosen or tighten screw to adjust the resistance. Wheelchair usage - 57...

  • Page 58: Positioning Belt

    4.10.13 Positioning belt Always wear your positioning belt. There is an accessory rail on each side of the seat frame where you can attach for example a positioning belt. Wrench 10 mm 1. Screw the positioning belt in place in the rail’s upper groove. 2.

  • Page 59: Maintenance

    A well maintained wheelchair lasts longer and has a lower risk of defects. Only carry out maintenance and minor adjustments that are specified in the user manual. All other maintenance, service, and repairs must be carried out by a qualified service technician authorized by Permobil. Maintenance - 59...

  • Page 60: Maintenance And Inspection Schedule

    Maintenance and inspection schedule Permobil recommends compliance with the following maintenance and inspection schedule. Contact your authorized dealer for all service-related needs or questions. Maintenance and inspection schedule Daily Weekly Monthly Yearly Check battery level indicator and charge the wheelchair if necessary.
  • Page 61 Maintenance and inspection schedule Daily Weekly Monthly Yearly Check that the freewheel mode and the freewheel lever work properly. Complete inspection, safety check, and service performed by an authorized wheelchair dealer. Maintenance - 61...

  • Page 62: Cleaning

    Cleaning Regular care and maintenance will prevent unnecessary wear and damage to your Permobil product. Turn off the power before you clean the wheelchair. 5.2.1 Metal surfaces Due to the high quality powder coating, optimum corrosion protection is guaranteed. Ideally, use a soft cloth or sponge, hot water, and a mild detergent for normal cleaning.

  • Page 63: Inflating The Drive Wheel Tires

    Inflating the drive wheel tires Only drive the wheelchair with the correct tire pressure. The tire pressure for the drive wheel tires is 250 kPa (35 psi). Permobil recommends that you check the tire pressure weekly and after any significant change in temperature or altitude.

  • Page 64: Restrictions And Limitations

    Restrictions and limitations This chapter contains information about support wheels and seat depth. The need for support wheels is based on seat depth, maximum speed, and user weight. If your wheelchair is not fitted with support wheels and your weight increases to more than 100 kg (220 lb.), support wheels must be installed.

  • Page 65: Troubleshooting

    Note that the guide cannot describe all the problems and events which may occur and you should always contact your service provider or Permobil technical support if you need additional assistance. Troubleshooting and repairs of electronics must always be performed by qualified personnel with good knowledge of the wheelchair’s electronics.
  • Page 66 Possible cause Remedy Event The battery charger is connected. Disconnect the battery charger. The wheelchair is in freewheel mode. Exit freewheel mode and restart the wheelchair. The wheelchair is locked. Unlock the wheelchair. The wheelchair cannot be driven. A seat function has triggered the Make sure that the backrest and the leg automatic drive inhibit.

  • Page 67: General Information

    This chapter contains information about warranty, standards and regulations, reporting incidents, scrapping, and technical specifications. Warranty Contact your dealer or Permobil Australia for information about the warranty period for this product. You can also find information on applicable warranties at https://permobil.com.au/support/power-wheelchairs/.

  • Page 68: Technical Specifications

    Technical specifications Mass of the heaviest part Backrest 7.5 kg (16.5 lb.) Pivot width 1200 mm (47") Minimum turning diameter 1490 mm (59") Required width of angled corridor 860 mm (34") Required doorway entry depth 1330 mm (52") Required corridor width for side opening 900 mm (35") Ground clearance 80 mm (3")
  • Page 69 How to contact your production unit Nashville, USA Timrå, Sweden PU TIM PU NAS Permobil AB Permobil Inc. Per Uddéns väg 20 300 Duke Drive Lebanon, TN 37090 861 36 Timrå Sweden +46 60 59 59 00 +1 800 736 0925...
  • Page 71 Dealer’s address and telephone number...
  • Page 72 337746 eng-AUS www.permobil.com 7 330818 369956...

Table of Contents