Mercedes-Benz COMAND Online Supplement Manual page 92

Dynamic route guidance
90
X
To show traffic report: select a road
(area, region) by turning cVd the COMAND
controller and press W to confirm.
You will find an example of a traffic report
on ( Y page 91).
X
To show TMC symbols: select
bol information
COMAND controller and press W to con-
firm.
Example display
Affected section of motorway
:
Icon for incident (traffic jam in the exam-
;
ple shown)
Icon display for the section of route affec-
=
ted
X
To show the next/previous incident:
Next
select or
press W to confirm.
X
To show the detailed view: select
Details
and press W to confirm.
X
To scroll the map: select
W to confirm.
You can move the map (
ble further traffic reports to be displayed.
List when route guidance is active
By default, the list shows the roads, areas and
regions that lie along the route and are affec-
ted by traffic reports.
TMC sym‐
by turning cVd the
Previous
(if available) and
Map
and press
Y page 61) to ena-
To display all reports (including those not
:
affecting the route)
To have traffic reports read out on route
;
( Y page 91)
Affected roads, areas or regions (only
=
available when there are traffic reports for
the route)
X
To show all traffic reports: select
play all messages
firm.
You will see a list of all roads, areas or
regions for which reports are available,
including those that do not affect the route.
X
To show a traffic report: select a road, an
area or a region and press W to confirm.
You will find an example of a traffic report
below.
X
To exit the list: slide XVY the COMAND
controller once or several times.
Dis‐
and press W to con-