Mercedes-Benz COMAND Online Supplement Manual page 116

Telephony via the Bluetooth
114
If you cannot make an emergency call, you
must arrange rescue measures yourself.
i The 999 or 112 emergency call number
is a public service. Any misuse is punisha-
ble by law.
Telephony via the Bluetooth
face
Conditions
On the mobile phone
If your vehicle is equipped with convenience
telephony and you wish to make calls via the
®
Bluetooth interface, your mobile phone
should not be inserted in the mobile phone
bracket or connected to the mobile phone
bracket. Doing so could result in a malfunc-
tion, depending on the type of mobile phone.
For telephony via COMAND's Bluetooth
interface, a Bluetooth
phone is required.
Not all mobile phones available on the market
are equally suitable. You can obtain more
detailed information about suitable mobile
phones and about connecting Bluetooth
capable mobile phones to COMAND from
your Mercedes-Benz Service Centre or on the
Internet (http://www.mercedes-
benz.com/connect).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the Blue-
®
tooth interface, you should check the fol-
lowing items on your mobile phone (see the
mobile phone operating instructions):
X
Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
i Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
®
®
inter-
®
®
-capable mobile
®
-
interface
X
®
Bluetooth visibility
On certain mobile phones, the device itself
must be made "visible" for other devices,
as well as activating the Bluetooth
tion (see the mobile phone operating
instructions).
X
®
Bluetooth device name
Every Bluetooth
®
tooth device name. This device name is
freely definable, but can be identical for all
devices from the same manufacturer. It is
therefore recommended that you change
this name so that you can easily recognise
your mobile phone (see the mobile phone
operating instructions).
X
Switch on the mobile phone and enter the
PIN when prompted to do so (see the
mobile phone operating instructions).
X
Activate Bluetooth
necessary, Bluetooth
mobile phone (see the mobile phone oper-
ating instructions).
On COMAND
X
Activate the Bluetooth
COMAND ( Y page 46).
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
connect it.
When you authorise a new mobile phone, it is
connected automatically.
Connecting comprises:
searching for a Bluetooth
R
phone
subsequently authorising it
R
You can connect up to 15 mobile phones.
During connection, the phone book, call lists
and text messages are automatically down-
loaded to COMAND.
®
func-
®
device has its own Blue-
®
functions and, where
®
visibility on the
®
function in
®
-capable mobile