Mercedes-Benz COMAND Online Supplement Manual page 104

Map operation and settings
102
The entries show the number of the motorway
and motorway exits as well as their distance
from the vehicle's current position.
Switching the city model on/off
When the city model is switched on, the map
shows buildings as 3D models.
i The city model is only shown for "Bird's-
eye view" or "3D map".
It is available for map scales 50 m and
100 m.
The data required for displaying buildings
is not available for all towns.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
City (3D)
Select
Depending on the previous state, switch
the option on O or off ª.
City model (example)
Showing/hiding intersecting streets
If route guidance is inactive, intersecting
streets can be shown on the upper edge of
the display.
X
To show the menu: press W the COMAND
controller.
and press W to con-
and press W to confirm.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
Next intersecting street
Select
press W to confirm.
Depending on the previous state, switch
the option on O or off ª.
Intersecting street (example: city route)
Intersecting street (example: motorway route)
Coordinates on the map
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
and press W to con-
and
and press W to con-