Mercedes-Benz COMAND Online Supplement Manual page 256

TV mode
254
Selecting TV channels
Selecting channels from the navigation
menu
X
Press the = or ; button on the
remote control while the display window is
active.
or
X
Press the E or F button.
The TV tuner selects the previous or next
channel from the alphabetical channel list.
Selecting channels via the channel pre-
sets
X
To show the menu: press the 9 button
on the remote control.
or
X
Menu
Select while the navigation menu is
shown and press the 9 button to confirm.
X
Presets
Select
tons and press the 9 button to confirm.
The station preset memory appears. The
# dot indicates where the selected chan-
nel is currently stored.
Channel presets
X
Select a channel using the 9: but-
tons and press the 9 button to confirm.
or
X
Press a number button.
using the =; but-
Selecting a channel from the channel
list
Notes on the channel list can be found in the
"Video" section ( Y page 228). Information
regarding COMAND also applies to the Rear
Seat Entertainment System.
X
To show the menu: press the 9 button
on the remote control.
or
X
Menu
Select while the navigation menu is
shown and press the 9 button to confirm.
X
TV
Select using the =; buttons and
press the 9 button to confirm.
X
Station list
Select
button to confirm.
The channel list appears. The # dot in
front of a list entry indicates the currently
selected channel. A number before the list
entry shows the memory slot in the channel
presets.
X
Select a channel using the 9: but-
tons and press the 9 button to confirm.
Selecting channels by entering the
channel and programme number
Several programmes can be transmitted on
one channel with digital TV. You can therefore
enter a channel and the desired programme
on this channel.
Only one programme can be sent on a chan-
nel with analogue TV. The programme entry
function therefore has no effect.
X
To show the menu: press the 9 button
on the remote control.
or
X
Menu
Select while the navigation menu is
shown and press the 9 button to confirm.
X
Option 1: select TV
buttons and press the 9 button to confirm.
X
Select Channel entry
button to confirm.
and press the 9
using the =;
and press the 9