Mercedes-Benz COMAND Online Supplement Manual page 88

Route guidance
86
COMAND controller and press W to con-
firm.
Displaying and editing the recorded
route
X
Insert the SD memory card (
X
List
Select in the "Routes" menu by turn-
ing cVd the COMAND controller and press
W to confirm.
Previously recorded routes are displayed.
X
Select a route and press W to confirm.
The map appears with a menu. The recor-
ded route is shown in the map with a blue
dotted line.
Turning off from the route on the map
X
Demo
Select by turning cVd the COMAND
controller and press W to confirm.
The map with the crosshair appears.
X
Proceed as described in the "Route display"
Y
section ( page 84).
Starting route calculation
X
Select
the COMAND controller and press W to
confirm.
COMAND attempts to align the recorded
route with the digital map.
Y page 196).
Editing the route
You can change the route name and the icon.
X
Select
the COMAND controller and press W to
confirm.
X
To change the route name: select
Rename
i The name cannot be changed while the
vehicle is in motion.
X
To change the icon: select
and press W to confirm.
X
A description for both entries can be found
in the "Personal special destinations" sec-
tion under "Managing categories for per-
sonal special destinations" (
Changing direction for route calculation
You can set the icon for the route to the start-
ing point or to the destination thereby chang-
ing the direction for route calculation.
i During route calculation, one-way streets
or turn restrictions, for example, are taken
into account. Therefore, the outward and
return routes may differ from each other.
Start
in the menu by turning cVd
Edit
in the menu by turning cVd
and press W to confirm.
Change icon
Y page 72).