Mercedes-Benz COMAND Online Supplement Manual page 100

Map operation and settings
98
X
Map settings
Select
firm.
The map settings menu appears.
Setting the map orientation
Map orientation
Current map orientation
:
The following display modes are possible:
0 North orientation (the map view is dis-
R
played so that north is always up).
¤ Orientation in direction of travel (the
R
map is displayed so that the direction of
travel is always up; the orange point of the
icon points north).
¤ Bird's-eye view (the map is displayed so
R
that the direction of travel is always up; the
map projection reproduces the curvature
of the earth and the orange point of the icon
points north).
¤ 3D map (the map is displayed so that
R
the heading is always up; at a scale of
1 km or less, the map displays elevation;
the orange point of the icon points north)
X
To show the menu: press W the COMAND
controller.
and press W to con-
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
Map orientation
Select
confirm.
A # dot indicates the current setting.
Map orientation menu
X
North up, Heading
Select
eye view 3-D map
or
COMAND controller and press W to con-
firm.
A # dot indicates the new setting.
Setting the special destination icons in
the map
You can set the special destinations you wish
to have displayed as symbols on the map.
Special destinations are, for example, filling
stations, hotels, cinemas and restaurants.
The following settings are possible:
Standard symbols
R
Symbol display determined by the factory
settings.
Personal symbols
R
You can determine the symbols yourself.
No symbols
R
The map does not show any symbols.
X
To show the menu: press W the COMAND
controller.
and press W to con-
and press W to
up, Bird's-
by turning cVd the