Mercedes-Benz COMAND Online Supplement Manual page 60

Destination entry
58
Option 1: postcode list with character bar
X
Enter a postcode. Instructions for entering
characters using town input as an example
can be found in the "Entering characters in
navigation mode (entering a town)" section
Y
( page 25).
Option 2: postcode list as selection list
Postcode list
X
Select the desired postcode by turning
cVd the COMAND controller.
X
Irrespective of the option, press W to con-
firm your selection.
If COMAND can assign the postcode to one
town unambiguously (e.g. 74172 for NECK-
ARSULM), the address entry menu appears
again. You can now complete the address,
e.g. by entering a street.
If COMAND cannot assign the postcode
unambiguously to a specific address, the
address entry menu also appears again.
The postcode is automatically entered. You
can now enter the street for a more precise
location. Only streets in the area covered
by the entered postcode are available.
X
Start route calculation (
Entering a centre
Entering a centre will, for example, delete a
previously entered street.
X
Centr.
Select (centre) in the address entry
menu by turning cVd and sliding ZVÆ the
COMAND controller and press W to con-
firm.
You will see the centre list either with the
character bar (option 1) or as a selection
list (option 2).
Option 1: centre list with character bar
X
Enter a centre. Instructions for entering
characters using town input as an example
can be found in the "Entering characters in
navigation mode (entering a town)" section
( Y page 25).
i In big cities, you can also enter the cen-
tres of districts.
Option 2: centre list as a selection list
Y page 56).