Video Aux Operation - Mercedes-Benz COMAND Online Supplement Manual

Video AUX operation

238
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It is possible that the settings may
also be accessed in the DVD menu
( Y page 236).
X
In full-screen mode, press W the COMAND
controller to show the menu.
X
DVD-Video
Select
cVd the COMAND controller and press
W to confirm.
X
Select DVD functions
confirm.
X
Subtitles
Select
press W to confirm.
In both cases, a menu appears. The # dot
in front of an entry indicates the current
setting.
X
Select a setting by turning cVd the
COMAND controller and press W to con-
firm.
Interactive content
DVDs can contain interactive content (e.g. a
video game). In a video game, for example,
you may be able to influence events by select-
ing and triggering actions. The type and num-
ber of actions depend on the DVD.
X
Select an action by sliding ZVÆ or XVY the
COMAND controller and press W to exe-
cute it.
A menu appears and the first entry,
Select, is highlighted.
X
Press W the COMAND controller.
Video AUX operation
Connecting external video sources
If your vehicle is equipped with a Media Inter-
face, you can connect an external video
source.
in the menu by turning
and press W to
Camera angle
or and
You require an additional audio/video cable
set to connect an external video source to the
Media Interface.
For more details, please contact a Mercedes-
Benz Service Centre or visit http://
www.mercedes-benz.com/connect. Then,
follow the instructions in the "Media Inter-
face" section.
You will find the connection sockets in the
glove compartment.
Audio/video sockets
Video port (V) (yellow)
:
Audio port (L) (white)
;
Audio port (R) (red)
=
i To facilitate correct playback, it may be
necessary to set a suitable video standard
in the external video source.
X
Connect the external device to correspond-
ing port :, ; or =.
COMAND activates the device.
Switching on video AUX mode
X
Video
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
If video AUX mode was the last mode selec-
ted, it will now be active.