Mercedes-Benz COMAND Online Supplement Manual page 102

Map operation and settings
100
X
Arrival time /
Select
rent street,
and press W to confirm.
X
To exit the menu: slide XVY the COMAND
controller.
Arrival time/distance to the destination
Arrival time/distance display switched on
Icon for destination
:
Distance to the destination
;
Estimated time of arrival
=
You can only see this display during route
guidance. While scrolling the map
( Y page 61), you will see additional data, e.g.
road names, depending on the crosshair posi-
tion, if the digital map supports this data.
i
During route calculation, or if the vehicle
is travelling on a non-digitised road, the lin-
ear distance to the destination is shown. In
this case, the display will be greyed out.
Distance,
Geo-coordinates
or
Road display
Road display active
Road name or designation
:
Cur‐
Geo-coordinate display
None
Geo-coordinate display active
Current height above average sea level
:
(rounded to the nearest 10 m)
Current vehicle position: latitude coordi-
;
nates
Current vehicle position: longitude coor-
=
dinates
Number of GPS satellites currently being
?
used
There must be sufficient GPS reception for all
displays to be shown. If this is not the case,
the display will be greyed out. Height dis-
play : may vary from the actual value,
because the navigation system uses the GPS
signals for the calculation.
While scrolling the map (
see the geo-coordinates of the crosshair posi-
tion. Height display : and number of satel-
lites used ? are not displayed.
Y page 61), you will