Mercedes-Benz COMAND Online Supplement Manual page 61

X
Select a centre by turning cVd the
COMAND controller.
X
Irrespective of the option, press W to con-
firm your selection.
The address entry menu appears again. The
centre selected has been entered.
X
Start route calculation (
Entering a junction name
Entering a junction will delete a previously
entered house number.
X
Junct.
Select (junction) in the address
entry menu by turning cVd and sliding
ZVÆ the COMAND controller and press
W to confirm.
You will see the junction list either with the
character bar (option 1) or as a selection
list (option 2).
Option 1: junction list with character bar
X
Enter a junction. Instructions for entering
characters using town input as an example
can be found in the "Entering characters in
navigation mode (entering a town)" section
( Y page 25).
Option 2: junction list as selection list
Y page 56).
Destination entry
G icon indicating more selection options
:
X
Select a junction by turning cVd the
COMAND controller and press W to con-
firm.
Entries with the G icon cannot be uniquely
assigned. Another selection list is shown.
X
Select an entry by turning cVd the
COMAND controller and press W to con-
firm.
The address entry menu appears again. The
junction selected has been entered.
X
Start route calculation (
Selecting a destination from the des-
tination memory (e.g. My address)
Introduction
The destination memory always contains an
entry named "My address". You may wish to
assign your home address to this entry, for
example ( Y page 57), and select it for route
guidance. This entry is always located at the
top of the list in the destination memory.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Destination
Select
tem menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
Y page 56).
in the navigation sys-
Z
59