Mercedes-Benz COMAND Online Supplement Manual page 264

Active COMAND source mode
262
X
Subtitles
Select
press the 9 button to confirm.
In both cases, a menu appears after a few
seconds. The # dot in front of an entry
indicates the current setting.
X
Select a setting using the 9: but-
tons and press the 9 button to confirm.
X
To exit the menu: press the =
or ; button.
Interactive content
DVDs can also contain interactive content
(e.g. a video game). In a video game, you may
be able to influence events by selecting and
triggering actions. The type and number of
actions depend on the DVD.
X
Select an action using the
9;:= buttons on the
remote control and press the 9 button to
execute it.
A menu appears and the first entry,
Select, is highlighted.
X
Press the 9 button.
Active COMAND source mode
Switching the function on/off in
COMAND
You can transfer an audio or video source
selected in COMAND to the Rear Seat Enter-
tainment System.
i If you subsequently switch modes in
COMAND, the new source will not be trans-
mitted to the Rear Seat Entertainment Sys-
tem.
X
To switch on the function in COMAND:
switch on the desired audio mode in
COMAND, e.g. CD mode (
show the menu in video DVD mode
( Y page 51).
X
Select the menu item at the bottom left,
CD
e.g. in audio CD mode, by sliding VÆ
Camera angle
or and
Y
page 196), or
and turning cVd the COMAND controller
and press W to confirm.
A menu appears.
X
Active audio/video source in
Select
rear
and press W to confirm.
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
X
To switch off the function in COMAND:
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
X
Select the menu item at the bottom left,
CD
e.g. in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
X
Rear off_ and press W the
Select
COMAND controller to confirm.