Mercedes-Benz COMAND Online Supplement Manual page 59

Address entry menu with destination address
Destination address
:
To start route calculation
;
X
In the address entry menu, confirm
by pressing W.
If no other route has been calculated, route
calculation starts immediately (Option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
Option 1 — no route guidance active: route
calculation starts. While route calculation is
in progress, an arrow will indicate the direc-
tion to your destination. Below this, you will
Calculating fast
see a message, e.g.
route....
Once the route has been calculated, route
guidance begins. If the vehicle is travelling on
a non-digitised road, the system displays the
linear distance to the destination, the direc-
tion of the destination and the
message. In this case, the display will be
greyed out.
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
to terminate the currently active route guid-
ance.
X
Yes No
Select or and press W to confirm.
If you select Yes, COMAND will stop route
guidance and start route calculation for the
new destination.
If you select No, COMAND will continue
with the active route guidance.
i Route calculation takes a certain amount
of time. The time depends on the distance
from the destination, for example.
COMAND calculates the route using the
digital map data.
The calculated route may differ from the
ideal route, e.g. due to roadworks or incom-
plete map data. Please also refer to the
notes about the digital map (
Entering and storing your home address
You can either enter your home address for
the first time (option 1) or edit a previously
stored home address (option 2).
Start
X
Option 1: enter the address, e.g. a town,
street and house number (
X
Once you have entered the address, select
Save
cVd and sliding ZVÆ the COMAND con-
troller and press W to confirm.
X
Select
W to confirm.
COMAND stores your home address as
address
X
Option 2: proceed as described under
"Option 1".
A prompt appears asking whether the cur-
rent home address should be overwritten.
X
Select
Off road
After selecting Yes, the
dure successful
Entering a postcode
Entering a postcode will delete a previously
entered town.
X
Select
by turning cVd and sliding ZVÆ the
COMAND controller and press W to con-
firm.
You will see the postcode list either with
the character bar (option 1) or as a selec-
tion list (option 2).
Destination entry
in the address entry menu by turning
Save as "My Address"
in the destination memory.
Yes
and press W to confirm.
Saving proce‐
message appears.
Postcode
in the address entry menu
57
Y page 107).
Y
page 54).
and press
My
Z