Mercedes-Benz COMAND Online Supplement Manual page 107

Option 2: the list appears
"Avoid area" list (example)
i Available list places are named
<x>
and are shown in grey.
X
Avoid new area
Select
the COMAND controller and press W to
confirm.
A menu appears.
X
Using map,
Select
personal POIs
and press W to confirm.
Using
If you select
crosshair appears.
From memory
If you select
sonal POIs, either the destination mem-
ory ( Y page 92) or a menu (
appear.
X
Select destination and press W to confirm.
X
When the destination address is displayed,
Map
select and press W to confirm.
The map appears.
X
Proceed according to the instructions
under "Option 1: the menu appears" if you
Area
by turning cVd
From memory From
or
map, the map with the
From per‐
or
Y page 74)
Additional settings
wish to set a new area to be avoided in the
map.
The following illustration shows an example
with two areas that are to be avoided.
New area to be avoided, the size of which
:
can still be adjusted
Area currently being avoided
;
Switching an avoided area on/off
X
Select an entry in the list by turning cVd
the COMAND controller and press W to
confirm.
The avoided area is switched on O or off
ª depending on the previous status.
Displaying and changing an avoided
area
X
Select an entry in the list by turning cVd
the COMAND controller.
X
Options
Select by sliding VY the
COMAND controller and pressing W to
confirm.
X
Display/Change
Select
confirm.
The area to be avoided is indicated in the
map.
X
To change the location of the area: slide
the COMAND controller XVY, ZVÆ or
aVb.
The area is moved on the map.
105
and press W to
Z