Mercedes-Benz COMAND Online Supplement Manual page 158

Setting access data
156
X
To set the DNS address: in the list of
access data (
address:
input field by pressing W.
The # dot in front of an entry indicates the
current setting.
X
Automatic
Select
COMAND controller and press W to con-
firm.
Automatic
negotiates the DNS addresses
automatically.
Manual
uses the entries in DNS 1 and DNS
2.
Entering the example DNS
X
After selecting Manual, select the
input field with the COMAND controller and
press W to confirm.
X
For example, enter 172.28.4.81. Instruc-
tions for entering characters using the con-
trols can be found in the "Operating
COMAND" section (
Entering the DNS1
Y
page 154) confirm the
Manual
or with the
Y page 27).
Using previously set Internet access
DNS
data for another mobile phone
If the access data is already available in the
list of mobile phone network providers, you
can use it for another mobile phone.
The following prerequisites are required for
this:
the mobile phone must be connected
R
the access data must apply to the mobile
R
phone contract of the currently connected
mobile phone
X
Select a provider in the list of mobile phone
network providers (
cVd the COMAND controller and press
W to confirm.
After you select the provider, the list of
mobile phone network providers is closed.
The selected provider is entered.
X
Slide XVY the COMAND controller to call
up the carousel view.
Managing access data of the mobile
phone network provider
DNS1
Overview
The access data of the mobile phone network
provider can be:
edited
R
copied, edited and accepted for a new pro-
R
vider name
deleted
R
i Changes that you make to the access
data of a mobile phone network provider
apply for all mobile phones that use this
access data.
Y page 153) by turning