Mercedes-Benz COMAND Online Supplement Manual page 103

"None" menu option
Display switched off
Current map orientation
:
i While scrolling the map, you can see addi-
tional data, depending on the position of
the crosshair, such as a road name, if the
digital map supports this data.
Switching the topographical map on/
off
The topographical map uses different colours
to depict elevation. The colour key generally
reflects the topography's dominant vegeta-
tion or the ground's perceived colour when
seen from the air, for example:
green (grass) for lowland
R
yellow, brown (woodland) for hills
R
grey (stone) and white (snow) for moun-
R
tains.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
Topographic map
Select
confirm.
Depending on the previous state, switch
the option on O or off ª.
and press W to con-
and press W to
Map operation and settings
Topographical map (example)
Motorway information
When driving on motorways, you can have the
nearest filling stations, rest areas, etc., as
well as your current distance from them,
shown on the right-hand side of the display.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
Motorway information
Select
W to confirm.
Depending on the previous state, switch
the option on O or off ª.
Motorway information (example)
and press W to con-
and press
Z
101