Mercedes-Benz COMAND Online Supplement Manual page 195

There is a risk of being distracted from the
road and traffic conditions if this is done while
the vehicle is in motion.
Inserting/ejecting CDs/DVDs
Notes
If the CD/DVD has a printed side, this must
face upwards when the CD/DVD is inserted.
If neither side is printed, the side to be played
should face downwards. CDs/DVDs with
copy protection may not be able to be played
by the system.
i If a medium contains other files in addi-
tion to music files, the loading time before
the first track starts to play may be longer.
Inserting a disc into the single DVD
drive
X
Press the 8 eject button.
If there is a disc already inserted, it will be
ejected.
X
Take the disc out of the slot.
X
Insert a disc into the slot.
The disc is drawn in and playback starts if
the disc has been inserted correctly and it
is a permissible type of disc.
Ejecting a disc from the single DVD
drive
X
Press the 8 eject button.
X
Take the disc out of the slot.
If you do not take the disc out of the slot,
COMAND will draw it in again automatically
after a short while and load it again.
Inserting discs into the DVD changer
The DVD changer has a fixed magazine with
six trays.
Audio CD/DVD and MP3 mode
X
To insert a CD/DVD into the magazine
tray: press the V load/eject button.
A menu shows the current load status of
the magazine trays. The last tray selected
is identified by a red digit.
X
Select a magazine tray to be filled by turn-
ing cVd the COMAND controller and press
W to confirm.
or
X
Press a number key, e.g. j.
The DVD changer switches to the selected
magazine tray. You see the
wait...
message.
Please insert disc
You then see the
<x>
message.
i Never insert a data medium before
COMAND prompts you to do so. Never
insert more than one disc at a time into a
magazine tray.
X
Insert a disc into the disc slot with the prin-
ted side facing upwards.
193
Please
Z