Mercedes-Benz COMAND Online Supplement Manual page 234

Video DVD mode
232
function is switched on,
display window.
X
To exit the menu: slide XVY the COMAND
controller.
Setting the reception region
The correct reception region setting ensures
that analogue TV channels can be received
with the usual quality and functionality.
COMAND is set to the correct reception
region at the factory. If you are driving your
vehicle in a different country or region, you
should set COMAND accordingly. A
Mercedes-Benz Service Centre can help you
to select the correct reception region.
X
To show the menu: press W the COMAND
controller.
X
TV
Select by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
TV standard
Select
firm.
A list appears, showing the reception
regions. The # dot in front of a list entry
indicates the currently selected reception
area or country.
X
Select the reception area and press W to
confirm.
A message appears to inform you that if the
wrong country is set, correct reception will
not be possible.
X
Yes
Select or
If you select Yes, COMAND will switch to
the country setting you have selected.
If you select No, the country list will appear
again.
Teletext
Introduction
Teletext can only be received if there is no
interference in the picture reception. The tel-
etext function receives all teletext pages for
the channel currently set, excluding sub-
FIX
appears in the
and press W to con-
No
and press W to confirm.
pages, and stores them in the system mem-
ory. If you set a different channel, the memory
is cleared and refilled.
Switching teletext on/off
X
To show the menu: press W the COMAND
controller.
X
To switch on: select
VÆ and turning cVd the COMAND con-
troller and press W to confirm.
X
To switch off: press and hold the %
back button.
The TV picture appears.
Selecting a teletext page
X
To access a page directly: press the cor-
responding number keys.
i You can only enter pages that are permis-
sible for teletext between 100 and 899.
X
To access the previous/next page: turn
cVd or slide ZV¬ the COMAND control-
ler.
Dynamic teletext page
A dynamic teletext page consists of several
subpages. The display automatically changes
to the next page after a certain time.
Video DVD mode
Safety notes
G
Risk of injury
COMAND is classified as a class 1 laser prod-
uct. You must not open the casing. If you open
the casing, or if the casing is faulty or dam-
aged, there is a risk of exposure to invisible
laser radiation. This may damage your eyes,
or those of others.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
Teletext
by sliding