Mercedes-Benz COMAND Online Supplement Manual page 85

The route is shown in the map with a dark blue
line.
Route 1 is calculated with the current settings
for the route type and route options
( Y page 52). The alternative routes 2 to 4 are
calculated with the same route options as for
route 1. Route 4 is the economic route (eco
route).
Route 4 (example: eco route)
The route is shown in the map with a green
line.
Option 2
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV the COMAND controller and
press W to confirm.
X
Calculate alternative routes
Select
and press W to confirm.
Depending on the previous status, the func-
tion is switched on O or off ª.
Function is activated: alternative routes
are calculated directly after the destination
is entered.
Menu functions
X
To select the next or previous alterna-
Next
tive route: select
press W to confirm.
Previous
or and
X
To start route guidance using the selec-
ted alternative route: select
press W to confirm.
COMAND calculates the alternative route.
Displaying destination information
You can display destination information for
the destination, for both waypoints and the
intermediate stop, if they are part of the
route.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Route
Select in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Destination information
Select
press W to confirm.
Destination information is displayed.
Destination information (example)
The example shows:
the destination O
R
two waypoints
R
the relevant information on distance, esti-
R
mated time of arrival and estimated
remaining driving time
i If a mobile phone is connected to
COMAND ( Y page 114) and a phone num-
ber is included in the destination informa-
tion, you can call it.
Route guidance
Start
and
and
Z
83