Mercedes-Benz COMAND Online Supplement Manual page 198

Audio CD/DVD and MP3 mode
196
Inserting an SD memory card
X
Insert the memory card into the slot until it
engages in place. The side with the con-
tacts must face downwards and point
towards the slot.
COMAND loads the memory card and
shows a message to this effect. If no MP3
tracks can be found, you will see a message
to this effect.
Ejecting an SD memory card
X
Press the memory card.
The memory card is ejected.
X
Take the memory card out of the slot
( Y page 15), position H.
Connecting a USB device
The USB port is located in the stowage com-
partment in the centre console.
Electrical consumption at this connection
must not exceed a continuous current of
500 mA. If the electrical consumption is
higher, use a separate source to provide
power for the USB device (e.g.
12 V power supply).
The following data formats are supported:
AAC: fixed and variable bitrates (Low Com-
R
plexity profile)
MP3, WMA: fixed and variable bitrates up
R
to 320 kbit/s
X
Connect the USB device (e.g. USB stick) to
the USB port.
Activating audio CD/DVD or MP3
mode
Option 1
X
Insert a CD/DVD (
card ( Y page 196) or connect a USB device
( Y page 196).
COMAND loads the medium inserted and
starts to play it.
Y
page 193), SD memory
Option 2
X
Press the h function button one or more
times.
By pressing the function button repeat-
i
edly, you can change the operating mode
in the following order:
audio CD/DVD/video DVD/MP3 CD/
R
MP3 DVD in the DVD changer or single
DVD drive (disc mode)
memory card mode
R
MUSIC REGISTER
R
USB storage device
R
Media Interface or audio AUX mode
R
®
Bluetooth audio mode
R
X
Select an audio medium from the media list
( Y page 198).
Option 3
X
Audio
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
The last active audio source is now activa-
ted.
You can activate another audio source via
the audio menu.
X
Audio
Select by sliding ZV and turning
cVd the COMAND controller and press
W to confirm.
The audio menu appears.
X
Select Disc, Memory
TER, USB storage
and press W to confirm.
This switches to the desired audio source.
X
Select an audio medium from the media list
( Y page 198).
card, MUSIC REGIS‐
Media Interface
or