Mercedes-Benz COMAND Online Supplement Manual page 67

firm. COMAND switches to telephone
mode ( Y page 125).
i This menu item is available if the waypoint
has a telephone number and a mobile
phone is connected to COMAND
Y
( page 114).
X
To call up the map: select
COMAND controller and press W to con-
firm.
X
You can move the map and select the des-
tination.
X
To store the waypoint in the destination
memory: select Presets
COMAND controller and press W to con-
firm.
When you have accepted the waypoint, it is
entered in the waypoint menu. The example
shows the menu with two entered waypoints.
Waypoint menu with two waypoints
Editing waypoints
You can:
change waypoints
R
change the sequence in the waypoint menu
R
delete waypoints
R
To change the sequence, both waypoints
must be entered.
X
To change waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
X
X
X
Map
with the
X
with the
X
i
Accepting waypoints for the route
X
i
In the example, there is an intermediate stop
P and a waypoint.
Destination entry
by turning cVd the COMAND controller
and press W to confirm.
Edit
Select and press W to confirm.
Use one of the destination entry options
offered.
To change the sequence of the way-
Swap
points: select in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
The entries are swapped.
To delete waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
Delete
Select and press W to confirm.
You can delete a waypoint directly after
entry using this menu item.
Select Start in the waypoint menu by turn-
ing cVd the COMAND controller and press
W to confirm.
The route is calculated with the entered
waypoints.
Continue
is displayed instead of
Calculate alternative routes
when
activated in the navigation menu
Y
( page 82), option 2.
65
Start
is
Z