Mercedes-Benz COMAND Online Supplement Manual page 108

Additional settings
106
X
To adjust the size of the area: turn
cVd the COMAND controller.
The area is enlarged or reduced.
X
To confirm the change: press W the
COMAND controller.
The list appears and the change is entered.
Deleting a set area
X
Select an entry in the list by turning cVd
the COMAND controller.
X
Select Options
COMAND controller and pressing W to
confirm.
X
Delete
Select
A query appears asking whether the entry
should be deleted.
X
Yes or No.
Select
If you select Yes, the entry is deleted.
If you select No, the process will be aborted.
Compass function
In the compass view, you can see the current
direction of travel, the current height above
sea level and the coordinates of the vehicle
position, for example.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Position
Select
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Compass
Select
by sliding VY the
and press W to confirm.
in the navigation system
and press W to confirm.
Compass (example)
Current direction of travel
:
Current height above average sea level,
;
rounded
Current vehicle position: longitude coor-
=
dinates
Number of GPS satellites currently being
?
used
Current vehicle position: latitude coordi-
A
nates
Currently set steering angle of the front
B
wheels
i
To display current height ;, the system
must be able to receive at least four satel-
lites. Steering angle B can be a maximum
of 35° in both directions.
X
To exit the display: confirm
ing W or press the % button.
Showing the map data version
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map version
Select
firm.
The map data version number is shown.
Information about new versions of the dig-
ital map can be obtained from a Mercedes-
Benz Service Centre.
Back
by press-
and press W to con-