Mercedes-Benz COMAND Online Supplement Manual page 196

Audio CD/DVD and MP3 mode
194
The DVD changer loads the disc into the
selected magazine tray. You see the mes-
Loading disc
sage:
i It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20 sec-
onds, the display returns to the magazine
menu.
The DVD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc
R
Full magazine tray (eject function is avail-
:
able)
Empty magazine tray (disc can be inser-
;
ted)
X
To exit the menu: press the V eject/
load button again or press the % back
button.
or
X
Back
Select by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
To fill empty magazine trays: press the
V load/eject button.
The magazine menu appears.
X
Fill empty
Select
Please wait...
You see the
COMAND switches to the next empty mag-
azine tray. You then see the
insert disc <x>
i Never insert a data medium before
COMAND prompts you to do so. Never
<x>....
slots.
message.
Please
message.
insert more than one disc at a time into a
magazine tray.
X
Insert a disc into the disc slot with the prin-
ted side facing upwards.
Please wait...
You see the
Once the disc is loaded, the DVD changer
switches to the next empty tray. You see
Please insert disc <x>.
the message:
X
Repeat this step until all trays are loaded.
The DVD changer will play the last disc loa-
ded if it has been inserted correctly and is
of a permissible type. This applies even if
not all trays have been loaded with a disc.
X
To cancel loading: press the V eject/
load button again or press the % back
button.
i
If you cancel loading with the % back
button, the system loads and plays the last
CD you inserted.
Ejecting discs from the DVD changer
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
X
To eject a CD/DVD: press the V load/
eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
Eject possible
:
Data medium type
;
Disc name (only if stored on the disc)
=
Current disc
?
message.