Mercedes-Benz COMAND Online Supplement Manual page 29

X
To accept the first list entry: press and
hold W the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as a selection list
Select the desired town from the selection
list.
If there are several entries for a town or if
several towns of the same name are stored,
then ¬ is highlighted in the character bar.
X
Press W the COMAND controller.
It is also possible to switch the town list to
the selection list at any time during character
input.
X
Slide ZV the COMAND controller repeat-
edly until the town list appears as a selec-
tion list.
or
X
Select ¬ in the character bar by turning
cVd the COMAND controller and press
W to confirm.
Option 2: town list as selection list
COMAND either shows the selection list auto-
matically or you can call up the selection list
from the list with character bar.
The example shows the selection list after the
BERLIN
town has been entered. The entry is
highlighted automatically. The G icon indi-
cates that there are several entries.
Operating COMAND
X
Confirm BERLING by pressing W the
COMAND controller.
You see the available entries.
X
BERLIN (1XXXX)
Confirm
the COMAND controller.
The address entry menu appears. You can
now enter a street, for example.
i You will find further information in the
"Destination entry" section (
Entering characters in the address
and the phone book
Introduction
The following section describes how to enter
characters in the phone book (
and the address book (
creating a new entry.
Creating a new entry in the phone book
X
Call up the input menu with data fields
( Y page 132).
by pressing W
Y page 53).
Y page 128)
Y page 141) when
27