Mercedes-Benz COMAND Online Supplement Manual page 47

X
Help window
Select
firm.
You have switched the help window on
O or off ª.
Individualisation
Introduction
Using individualisation, you can fine tune LIN-
GUATRONIC to your own voice and thus
improve voice recognition. This means that
other users' voices will not be recognised as
easily, and therefore this function can be
Y
deactivated ( page 46).
Individualisation comprises two parts and
takes approximately 5 minutes. It consists of
training the system to recognise a certain
number of digit sequences and voice com-
mands.
Starting new individualisation
Individualisation can only be started when the
vehicle is stationary. Before starting, switch
off all devices or functions which could inter-
fere, such as the radio or the navigation sys-
tem. After starting the session, the system
guides you through the training with spoken
instructions.
X
Press the W button.
X
Settings
Select by turning cVd the
COMAND controller and press W to con-
firm.
and press W to con-
LINGUATRONIC settings
X
Linguatronic
Select
firm.
X
Start new individualisation
Select
and press W to confirm.
You see and hear a prompt asking whether
you would like further information.
X
Yes No
Select or and press W to confirm.
If you select No, the first part of individual-
isation begins. You will be asked whether
you would like to train digits or voice com-
mands.
If you select Yes, you will see and hear
information on the individualisation proc-
ess. The first part of individualisation then
begins automatically.
X
To close the display: press W the
COMAND controller.
You will be asked whether you would like
to train digits or voice commands.
At the end of the first part, a prompt will
appear asking whether you wish to begin the
second part.
X
Yes No
Select or and press W to confirm.
If you select No, individualisation will be
cancelled. The data from the first part is
stored automatically.
If you select Yes, the second part will begin.
Individualisation is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
and press W to con-
45