Text Message (Sms) - Mercedes-Benz COMAND Online Supplement Manual

convenience telephony (
R
telephony via the Bluetooth
R
( Y page 118)
X
Call lists
Select
ing cVd the COMAND controller and press
W to confirm.
X
Speed dial preset list
Select
press W to confirm.
The speed dial list appears.
X
Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
X
Assign speed dial preset
Confirm
pressing W.
X
Proceed as described under option 1.
Making a call via speed dial
A description can be found in the "Making a
call" section ( Y page 125).
Deleting a speed dial number
X
To delete a speed dial number: select
Delete speed dial preset
"Speed dial" menu by turning cVd the
COMAND controller and press W to con-
firm.
The speed dial number is deleted.
X
To delete all speed dial numbers: select
Delete all speed dial presets
"Speed dial" menu by turning cVd the
COMAND controller and press W to con-
firm.
You will be asked whether you want to con-
tinue.
X
Yes No
Select or and press W to confirm.
If you select Yes, all speed dial numbers will
be deleted from the speed dial list.
If you select No, the process will be aborted.
Y page 120)
®
interface
by sliding VÆ and turn-
and
by
in the
in the

Text message (SMS)

Text message (SMS)
Information and requirements
The following conditions must be fulfilled in
order to use the functions:
Type of tel- Conditions
ephony
®
Bluetooth The Bluetooth
R
interface tel- phone supports the
ephony
MAP Bluetooth
(Message Access
Profile)
Convenience The mobile phone is
R
telephony inserted in the bracket
and switched on.
The PIN has been
R
entered.
The mobile phone is log-
R
ged into a mobile phone
network.
i Telephony via the SAP module, see the
separate operating instructions.
When the mobile phone is connected, the 30
most recent text messages which are cur-
rently stored on the phone are loaded to the
COMAND's text message inbox and dis-
played.
i
COMAND may not load all the most
recent text messages:
This may occur in exceptional cases, for
example when using certain mobile
phones/brackets and when the mobile
phone inbox holds many text messages.
If the above conditions are met, new incoming
text messages appear in the COMAND text
message inbox. In addition, a tone sounds
and the / icon appears. The symbol dis-
appears once you have read the text mes-
sage. The ú mail symbol is displayed when
the text message memory is full. The symbol
disappears once you delete at least one text
message.
137
®
mobile
®
profile
Z