Telephone Operation - Mercedes-Benz COMAND Online Supplement Manual

X
Select a volume setting by turning cVd the
COMAND controller.
X
To close the setting scale: press W or
slide XVY.

Telephone operation

Incoming call
Rejecting or accepting a call
When there is an incoming call, you see a cor-
responding window in the display.
X
Reject
To reject: select
the COMAND controller and press W to
confirm.
or
X
Press the ~ button on COMAND or the
multifunction steering wheel.
X
To accept: confirm
W.
or
X
Press the 6 button on COMAND or the
multifunction steering wheel.
by turning cVd
Accept
by pressing
Telephone operation
Multifunction display (example)
i You can also accept the call by voice com-
mand using LINGUATRONIC (see the sep-
arate operating instructions).
Once you have accepted the call, you can use
hands-free mode. The call volume can be
adjusted ( Y page 31). For more information,
see the "Functions during a single call con-
nection" section ( Y page 125).
The display shows the phone number or the
name and phone number (if the entry is stored
in the address book) or shows the
(phone number withheld) message.
i
You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
hide the window with the % button
R
next to the COMAND controller and then
accept the call with the ; button on
R
the multifunction steering wheel.
Making a call
Entering a telephone number using the
number keypad
X
Call up the telephone basic menu:
123
Unknown
Z