Mercedes-Benz COMAND Online Supplement Manual page 101

X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
POI symbols on map
Select
W to confirm.
X
Select Standard symbols,
symbols No symbols.
or
Personal
If you select
special destinations appears.
X
To switch the symbol display on/off:
select a special destination by turning
cVd the COMAND controller and press
W to confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the symbol
and press W to con-
and press
Personal
symbols, the list of
Map operation and settings
displays for more than one special destina-
tion.
X
To switch all personal symbols on/off:
All
select and confirm with W.
Depending on the previous state of the per-
sonal symbols, they will either be shown
O or hidden ª.
If the function is switched on O, the indi-
vidual special destinations are greyed out
and the previously selected settings remain
unchanged.
If the function is switched off ª, you can
reselect the individual special destinations.
They show the most recently selected set-
tings.
i The list shows all symbols that are con-
tained on the digital map across all coun-
tries. However, not all special destinations
are available in all countries. As a result,
certain special destination symbols may
not be displayed on the map, even if the
symbol display is switched on.
X
To exit the menu: press the % back
button.
Map information in the display
Showing text information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map settings
Select
firm.
The map settings menu appears.
X
Text information on map
Select
press W to confirm.
A # dot indicates the current setting.
and press W to con-
and
Z
99