Sbb-Ri Enclosure; Features; Environmental Conditions; Mounting - Vanderbilt lite blue Manual

60 lite blue Installation Manual

SBB-RI Enclosure

SBB-RI Enclosure
tamper switch should be attached to a UL Listed burglar alarm system or Listed local siren/annunicator.

Features


Metal enclosure with hinged door
 Enclosure Dimensions: 8.25" x 7.5" x 3.5"

Environmental conditions


Ambient Temperature: 0º to 49º C or 32º to 120º F

The room must be dust free and clean.

It is optimal to mount the enclosure on fire rated plywood which is affixed to a cinder block wall or a wall
covering i.e. sheetrock

Mount the cabinet in a secure, but generally accessible location

Mounting


Field Wiring - It is necessary to punch the knockouts in the metal enclosure for field wiring. It is
recommended that this is done before mounting the enclosure to the wall.

A non-metallic sleeve is recommended to protect the wiring where it enters the cabinet.

Mount the enclosure to the wall using the provided mounting holes. Recommended mounting hardware:
Four 1/4" x 1" lag bolts.

To secure the SBB-RI enclosure use two screws through the openings provided on the cover. Alternately a
lock can be added using the provided punch out section on the cover.
- An enclosure with a hinged door is included for each SBB-RI. The flying leads of the