Abbreviations; Schlage Wireless System Components - Vanderbilt lite blue Manual

116 lite blue Installation Manual

Abbreviations

Terms and description
Term
PIM
WAPM
WRI
The Schlage Wireless Access product line contains several variations of the same module.
Wireless Access Modules
Name
Panel Interface Module
Wireless Access
Wireless Reader Interface

Schlage Wireless System Components

There are various wireless devices that are used to integrate with lite blue. The Schlage wireless system
contains two different types of modules:

One wireless panel interface module (PIM)

Up to 16 wireless access point modules (WAPM)
The PIM (PIM-SBB Legacy) is hard wired to the lite blue power and communication channels via RS-485
protocol. The PIM installation location is determined by the location of the WAPM with which it will communicate
via radio frequency (RF).
The WAPM is installed at the access point where access will be controlled and/or monitored. Some wiring at the
access control point may be required, depending on the application being applied to the WAPM .
Regardless of which WAPM is used, the communication link is always RF.
Description
Panel Interface Module
Wireless Access Point Module
Wireless Reader Interface
Wireless system block diagram
Acronym
PIM
WA
WRI
Type
PIM
WAPM
WAPM
.