Using The Discovery And Configuration Tool To Set Date And Time - Vanderbilt lite blue Manual

38 lite blue Installation Manual
Set system date, time and time zone
6 Click on the
Zone window will open.
7 Set the date, time, and time zone:
Time
a) Using the
b) Click on the calendar button to the right of the
c) Select the date. The calendar pop-up will close.
d) Select the time zone from the
Optional
e) : Instead of setting the time and date manually the
used. Select the time zone from the
Sync time with local PC
on the
PC.
Note:
The regional time zone is set to Eastern Time by default.
Apply
8 Click on the

Using the Discovery and Configuration Tool to set date and time

Connect the PC running the Discovery and Configuration tool to the lite blue controller.
1

Direct Connection - Using a cross-over cable, the controller can be connected directly to the network
card of the PC.
drop down boxes, specify the time.
Regional Time Zone
Regional Time Zone
button and the date and time will be synchronized with that of the
button. The system time, date, and time zone will be updated.
button. The Utilities - System Date, Time, and Time
Date
field. The calendar pop-up will open.
list.
Sync time with local PC
list and click
button can be
Save Changes
. Then click