Table of Contents
Advertisement
128 lite blue Installation Manual
Note:
If multiple PIMs are being used on the same channel it is recommended that room be left in the addressing
range for later expansion. Example: Channel 1 of lite blue will have two PIMs. At time of installation one PIM will
be interfacing with 5 WAPMs and the other will be interfacing with 6. However there may be a time when more
WAPMs will be added to these PIMs. The first PIM will have an Addr Lo of 0 and an Addr Hi of 6. This leaves
room for an additional two WAPMs to be added to this PIM at a later date. The second PIM, when configured, will
have an Addr Lo of 7 and an Addr Hi of 15. This leaves room for an additional 3 WAPMS to be added to this PIM
at a later date.
Disconnecting PIM from the link mode
1
To disconnect PIM from the link mode, close the CDT application.
Configuring the WRI
Follow these steps to place the WRI into the Link Mode in order to setup proper panel address. There are two WRI
models; WRI -OTD and WRI - IN.
1
Make sure the PIM is already in link mode. See the Configuring PIM section for details.
2
Place the WRI-OTD into the link mode by pressing the reset switch.
3
Place the WRI-IN into the link mode by recycling power.
4
Go to the Link tab on the CDT screen.
5
Using the Panel drop down box select the Address (panel) of the WRI.
6
Click on the Start button. On the WRI the (LED2) will start blinking.
7
Generate a transaction by presenting any card to the reader or by pushing the tamper button. The
transactions will display on the CDT software screen. This indicates that the WRI reader has been
addressed.
8
Click on the Configuration tab. This tab is used to set the Heartbeat / First / Delay / Retry / FC Mode or Card
Number Mode.
a)
The Heart Beat is used to determine how often the WRI communicates with the PIM. Leave this at
default.
b)
Set the First / Delay to 300. This is required for proper operation.
c)
Set the Retry to 7. This is required for proper operation.
Example address settings for the second of two PIMs on one channel
Hide quick links:
Advertisement
Table of Contents
