Battery Replacement - Vanderbilt lite blue Manual

Chapter 1 lite blue

Battery Replacement

The lite blue controller uses a UL Listed Sanyo CR2330 or equivalent 3V Lithium Coin Cell battery. The battery
should be replaced every year.
To replace the battery:
lite blue
1 Hold the
2 After 10 seconds LED D7 will stay on sold and the
Disconnect the lite blue controller from any external power source(s).
3
4 Disconnect the Ethernet cable.
5 Remove the 3V Lithium Coin Cell battery from the smaller board.
6 Insert a new UL Listed CR2330 3V Lithium Coin Cell battery.
7 Connect the Ethernet cable.
8 Connect power source(s).
9 Set the date and time. See the
VLBIM06/15/15 v4.1.0
RESET/SHUTDOWN Switch for at least 10 seconds.
lite blue Date and Time Setup
lite blue
will power down within 1 second.
section for details.
41