Vanderbilt lite blue Manual page 113

112 lite blue Installation Manual
5 Change the default setting (10 Minutes) to 1 second to allow for a Door Forced or Door Held Open
transaction to be read by
Save
6 Click .
Configure Request to Exit
Device Options
1 Click on
at the bottom of the SUS screen.
Lock Properties
2 Click on
Edit tab
3 Click on the
4 Scroll down to the
5 Change the default setting of the Request to Exit option to
look like the following image:
lite blue
and activate the auxiliary relay.
once the connection steps above have been followed and
.
.
WRI400-Inputs
section of the Edit Tab.
Default Configuration
Active open
. When done the screen should
WRI400
is displayed