Schlage Ad-400 Components; Schlage Ad-400 Series Wireless Modules; Panel Interface Module (Pim400-485-Vbb) - Vanderbilt lite blue Manual

96 lite blue Installation Manual

Schlage AD-400 Components

The Schlage AD-400 Series wireless system contains two different types of modules:

One wireless panel interface module (PIM400)

One wireless lock (AD-400)
The PIM400 (PIM400-485-VBB) is hard wired to the
PIM400 installation location is determined by the location of the AD-400 lock with which it will communicate via
radio frequency (RF).
The AD-400 lock is installed at the access point where access will be controlled and/or monitored.

Schlage AD-400 Series Wireless modules

The two components of the AD-400 Series locks, the PIM400 and the AD-400 lock, are detailed in the following
sections.

Panel Interface Module (PIM400-485-VBB)

The PIM400-485-VBB can be integrated with the
The PIM400-485-VBB module is hard wired directly to lite blue communication channels and communicates via
RS-485 protocol. The PIM400-485-VBB can support up to 16 AD-400 locks.
NOTE
: When accessing the PIM400-485-VBB with the SUS the device may be labeled as "PIM400-485-SBB"
which does not affect programming of the device and should be ignored.
The PIM400 is capable of configuring, via the Schlage Utility Software (SUS), the following
items:

Heartbeat interval

Relock time

Card format type

Extended unlock

Polarity of status signals

Latch type

Query intervals and quantity for unlock requests

Cache mode

Lock state in case of RF communication loss

Relock action (timer only, door open or timer or door closed or timer card code conversions)
lite blue
communication channels via RS-485 protocol. The
lite blue
system, it works in conjunction with the AD-400 Locks.