Vanderbilt lite blue Manual page 128

Chapter 9 Schlage Wireless Readers
b) If more than one PIM is being used per channel set the PIM Addr of each PIM to the lowest number in
the address range. (See the next step for details on address range.)
Example: Channel 1 of lite blue will have two PIMs. One PIM will be interfacing with 5 WAPMs and the
other will be interfacing with 6. The first PIM will have an Addr Lo of 0 and an Addr Hi of 4. The PIM
Addr for this PIM will be 0. The second PIM, when configured, will have an Addr Lo of 5 and an Addr Hi
of 10. The PIM Addr for this PIM will be 5.
Note:
The PIM Addr setting should always be equal to the Addr Lo setting.
6 Using the Addresses tab, set the range of address for the WAPMs interfacing with the PIM.
a) If one PIM is being used per channel set the
b) If more than one PIM is being used per channel determine how many WAPMs will interface with each
PIM and address accordingly.
Example: Channel 1 of lite blue will have two PIMs. One PIM will be interfacing with 5 WAPMs and the
other will be interfacing with 6. The first PIM will have an Addr Lo of 0 and an Addr Hi of 4. The second
PIM, when configured, will have an Addr Lo of 5 and an Addr Hi of 10.
VLBIM06/15/15 v4.1.0
Example address settings for a single PIM on a channel
Example address settings for the first of two PIMs on one channel
Addr Lo Addr Hi
to 0 and the
127
to 15.