Table of Contents
Advertisement
Chapter 8 Schlage Adaptable AD-400 Series
7
Using the keypad, set the address of the PIM400.
Low Door
8
On the
communicate with this PIM400.
High Door
9
On the
communicate with this PIM400.
Save
10 Click
. The address of the PIM400 and the address range of the AD-400s have been set.
AD-400 Series Lock Configuration
Configuration of the AD-400 Series locks is accomplished by the SUS while the PDA is connected to the PIM400.
After the PIM400 has been configured you can Link AD-400 Locks to it and address them. Once the lock has been
addressed the user can test the connection using the Diagnostics section.
Linking/Addressing
Follow the steps bellow to link/address an AD-400 lock:
Start
1
Click
on the PDA. A Menu will open with a list of programs.
Schlage Utility Software
2
Select the
Manager
3
Select
4
Enter the password into the
Login
5
Click the
Connected.
6
Connect the PDA to the PIM400 using the supplied USB cable.
Device Options
7
Click on the
VLBIM06/15/15 v4.1.0
option, use the up and down arrows to define the low address of the AD-400s that will
option, use the up and down arrows to define the high address of the AD-400s that will
option to open
Log on as
from the
drop down menu.
Password
field. Default password is
button. The SUS program will open. The bottom of the screen will say
button.
SUS
.
123456
105
No Device
Hide quick links:
Advertisement
Table of Contents
