Vanderbilt lite blue Manual page 99

98 lite blue Installation Manual

Card Thickness - 0.030 inches thick

ANSI/ISO Standards 7810, 7811 1/51 7812, and 7813
Card Reader - Proximity Reader

ANSI/BHMA A156.25 compliant

Compatible with HID proximity cards

Wiegand output

Card Read Range: up to 4 inches

Compliance to FCC Part 15, RSS-210 of Industry Canada

ESD Protection: 12KV
Card formats
-Can read all card formats up to 255 bits.
Request-to-exit
- The sensor/switch is built-in and will be triggered from the activation of the door lever on the
protected side of the door.
Request-to-enter
- The sensor/switch is built-in as a momentary switch on the lock.
Clutch Position
- Schlage AD-400 locks provide a way to lock or unlock a door and monitor access from a
remote location. Schlage AD-400 locks are fail-safe from the protected side of the door.
Operational environment

Temperature: -35°C to +66°C

Humidity: 20% RH to 95% RH (non-condensing)
Power source
The Schlage AD-400 lock uses 4 or 8 AA alkaline battery packs. Optionally can be powered by 12VDC or 24VDC.
Operating voltage

Power Requirements (Battery): 4 AA batteries that will supply 6.2 volts.

The locks will continue to operate down to 4.5 volts before reaching a Low Battery state.

At 4.0 volts the lock reaches a battery critical state and will shut down and go into a failsafe or fail lock
mode depending on what the operations in the SUS have been set to.

Power Requirements (wired): 12 to 24VDC

Current Requirements: Standby: 55 micro Amps typical (Proximity version)

Power consumption: 300mA max.

Battery Life - Up to 2 years with 4AA (8AA option available for extended battery life)
Range
- The Schlage AD-400 Lock can have a range up to 200 feet on one floor when used in normal office
interior construction and up to 1000 feet line of sight.

Transmitter Power - Up to 200 mW

Receiver Sensitivity - 90dBm typical

Wiegand technology to external reader