Diagnostics - Vanderbilt lite blue Manual

Chapter 8 Schlage Adaptable AD-400 Series
Schlage
c) The
Exit Request Lever
d) Release
Stop
13 Once the

Diagnostics

Follow the steps below to determine if you have correctly Linked your AD-400 lock to your PIM400:
1 Log in to SUS (see steps above).
2 Connect the PDA to the PIM400 using the supplied USB cable.
Device Options
3 Click on the
VLBIM06/15/15 v4.1.0
button will blink as will the
.
option is enabled, the AD-400 is now linked to this PIM400 with the specified address.
button.
Internal Push Button Linking Mode
. The lock is now in
107
.