Vanderbilt lite blue Manual page 110

Chapter 8 Schlage Adaptable AD-400 Series
Note:
The WRI400 will send a tamper signal while the cover is off.
3 Log in to the SUS software (refer to the SUS User Guide for log-in procedure).
Note:
Make sure the HHD connection type is set to
4 Connect the HHD to the WRI400 USB port (J5). The WRI400's USB LED (2) will blink green.

The WRI400 is communicating with the HHD when the USB LED blinks green and the HHD display
WRI400
indicates
settings.
5 To Edit Settings or Update Firmware on the WRI400, the SUS software and the WRI400 must be coupled.
Follow the steps below to couple the WRI400 and the HHD.
Coupling with the HHD
1 Connect the WRI400 to the HHD (see section above for details).
2 On the WRI400, press and hold the
within 5 seconds. The USB LED will blink red and green.
3 On the SUS, select the option

Successful coupling will be indicated on the WRI400 with a blinking green USB LED.
Linking to a PIM400
Start
1 Click on the HHD. A Menu will open with a list of programs.
Schlage Utility Software
2 Select the
Manager
3 Select
4 Enter the password into the
Login
5 Click the
Connected.
6 Connect the HHD to the WRI400 using the supplied USB cable (see instruction above for details on
connecting the WRI400 to the HHD).
VLBIM06/15/15 v4.1.0
at the bottom of the main screen. The SUS is now ready to view the WRI400
SCHLAGE
Couple HHD to Device
option to open
Log on as
from the drop down menu.
Password
field. Default password is
button. The SUS program will open. The bottom of the screen will say
USB Connection
.
button while pressing the
. The SUS will report when coupling is successful.
SUS
.
123456
109
LINK
button three (3) times
No Device